What Is Lumen Count
"What Is Lumen Count" Was posted on June 28, 2019
Lumen Count The Most Important LED Specification
- Estimated yearly energy costs
- Light appearance
- Energy used
What is Lumen Count? This is the most important piece of information you can read if you are looking to replace and existing metal halide lamp, high pressure lamp, incandescent lamp or halogen lamp. While all of these factors play a role in the abilities of the light bulbs, the brightness factor is by far the most important factor. When we say brightness, it is referring to lumens. What do we mean by lumens? Here are some facts to know.
- Lumens refer to how much light the bulb puts out.
- Since a lumen is a unit of measurement, it makes sense that the higher the lumens, the brighter the bulb.
- When considering lumens, you should consider the amount of light needed for your space. It depends on the space you need to light. Brighter is not always better and can create a blinding effect in a space too small for the lumens.
- A light bulb for a workstation is recommended to be around 50 lumens per square feet while a living room setting of approximately 250 feet will need around 5000 lumens. It is important to note that this doesn’t mean you need only one light source to meet this lumen output. You could have a primary light source with 3000 lumens and a secondary with 2000 lumens lighting the room for a total lumen count of 5000.
It’s All About Lumen Not Wattage
When it comes to and kind of LED light bulbs, shop for lumen and not wattage. While the old way of shopping was based on wattage as the deciding factor, it is smarter to shop for lumens because you are buying the amount of brightness you need for your space. Here are a few general rules for this aspect of choosing lighting provided by the US Department of Energy. When you are looking to replace higher wattage metal halide lamps or high pressure lamps you will need to up the lumen count accordingly.
- To replace a 100 watt (W) incandescent bulb, look for a bulb that gives you about 1600 lumens. If you want something dimmer, go for fewer lumens; if you prefer brighter light, look for more lumens.
- Replace a 75W bulb with an energy-saving bulb that gives you about 1100 lumens
- Replace a 60W bulb with an energy-saving bulb that gives you about 800 lumens
- Replace a 40W bulb with an energy-saving bulb that gives you about 450 lumens
- To replace a 400W metal halide lamp you will need a minimum of 100W depending upon the lumen count of the LED lamp. One lamp may be rated at 100 lumen per watt while another may be rated at 150 lumen per watt.
When it comes to light bulbs, shop for lumen and not wattage. While the old way of shopping was based on wattage as the deciding factor, it is smarter to shop for lumens because you are buying the amount of brightness you need for your space. Aside from brightness or lumen output, the other factors play their part in achieving a great lighting solution.
You Can Save Up To 80% In Energy
- The estimated yearly cost will help you determine the effects of your utility bill based on a set of varying factors and suggested daily usage.
- The lifespan will take the calculated usage suggested and multiply it to tell consumers how many years the light bulb can be expected to last.
- Light appearance is the color temperature in terms of warm or cool.
- Finally, the energy used is how much energy is used to create the lighting. This is measured in watts.
With a basic understanding of the importance of lumens and how to choose the right bulb for your space, you can make a confident, informed decision. The Lighting Facts should be a handy guide as to the capabilities of a bulb, but lumens is where you should focus when shopping.
Something Else To Check Out
LED Lights Last 10+ Years. We can help you make the right decision for your application. Call 513-702-3533 or 407-230-9096 or 513-325-1623 or 262-707-7288. These are our cell phones…we will not put you on hold or send you to another extension.